Posted in 面试题 onFebruary 22, 2012
德尔福集团是全球最大的汽车系统和零部件生产制造商, 为客户提供品种齐全的汽车系统, 零部件和模块。今天成电的就业办老师介绍说,德尔福是汽车界的华为,从来不在媒体上打广告。
大家看看从美国空运过来的笔试题目
1、Name 3 Vehicle Buses.
2、Name 2 possible sources of Electromagnetic interference on Electronics Circuit ASM.
3、Wavelength for 12MHz frequency signal is____
4、Name 2 important considerations for car radio performance related to audiosignal processing under multipath condition?
5、What is the typical FM receiver RF signal strength to achieve 30dB S/N for car radio?
6、When a radio is tuned to 98.1 MHz & with a LO of 108.8 MHz, what is the image frequency?
7、For a system with a matched impedance, what is the Reflection Coefficient and SWR?
8、Which property of the output capacitor is the primary cause of Low Drop Out(LDO) regulator loop instability?
a) Equivalent series resistance(ESR)
b) Effective series inductance(ESL)
c) Capacitance value
d) Dielectric material
9、The switching regulator is capable of:
a) Higher power conversion efficiency
b) Providing an output voltage that is higher than the input
c) Generating an output boltage oppsite in polarity to the input
d) All of the above
10、A linear regulator op*(没抄清楚)
Vin(max)=10v,Vout(min)=4.8v,Iout(max)=2.5mA,Iq(max)=2.5mA,Ta(max)=8.5摄氏度,The regulator is available in 3 packages.Each package has the following thermal characteristics:
Package Rja(摄食度/W) Rjc(摄食度/W)
TO220 50 35
SO14 125 30
D1P8 100 52
Choose the most suitable package to handle the power dissipation requirement without a heat sink and why.
大家看看从美国空运过来的笔试题目
1、Name 3 Vehicle Buses.
2、Name 2 possible sources of Electromagnetic interference on Electronics Circuit ASM.
3、Wavelength for 12MHz frequency signal is____
4、Name 2 important considerations for car radio performance related to audiosignal processing under multipath condition?
5、What is the typical FM receiver RF signal strength to achieve 30dB S/N for car radio?
6、When a radio is tuned to 98.1 MHz & with a LO of 108.8 MHz, what is the image frequency?
7、For a system with a matched impedance, what is the Reflection Coefficient and SWR?
8、Which property of the output capacitor is the primary cause of Low Drop Out(LDO) regulator loop instability?
a) Equivalent series resistance(ESR)
b) Effective series inductance(ESL)
c) Capacitance value
d) Dielectric material
9、The switching regulator is capable of:
a) Higher power conversion efficiency
b) Providing an output voltage that is higher than the input
c) Generating an output boltage oppsite in polarity to the input
d) All of the above
10、A linear regulator op*(没抄清楚)
Vin(max)=10v,Vout(min)=4.8v,Iout(max)=2.5mA,Iq(max)=2.5mA,Ta(max)=8.5摄氏度,The regulator is available in 3 packages.Each package has the following thermal characteristics:
Package Rja(摄食度/W) Rjc(摄食度/W)
TO220 50 35
SO14 125 30
D1P8 100 52
Choose the most suitable package to handle the power dissipation requirement without a heat sink and why.
德尔福集团DELPHI的笔试题
声明:登载此文出于传递更多信息之目的,并不意味着赞同其观点或证实其描述。
Tags in this post...
Reply on: @reply_date@
@reply_contents@